Re: VMware separate hosts
TThanks Andre! I Have a router with a dongle. Thinking of using that. Router IP 192.168.2.1PC1 with windows VM - 192.168.2.3PC2 with Linux VM - 192.168.2.5Whats the IP that I have to configure for the...
View ArticleRe: VMware separate hosts
With the systems in the 19.168.2.x subnet, you just need to assign an unused IP address in this IP range to each of the VMs and - at least for the Windows VM which need Internet access - you also have...
View ArticleRe: VMware separate hosts
AAppreciate Andre. So do I choose bridged or NAT? THe IP addresses for the hosts - they need to map to either VMnet 1 or VMnet8. this case right? The above IP is the IP of the Local area network.
View ArticleRe: VMware separate hosts
I Assume the gateway and DNs would have to be 192.168.2.2, is this correct?
View ArticleRe: VMware separate hosts
With 192.168.2.x as the LAN network, you'd configure the VMs for Bridged networking. Btw. Bridged networking doesn't use a virtual host adapter like Host-Only (VMnet1) or NAT (VMnet8), but adds an...
View ArticleRe: VMware separate hosts
>>> I Assume the gateway and DNs would have to be 192.168.2.2, is this correct?This would be the case for NAT. In case of Bridged networking, you'd usually use the physical router's IP...
View ArticleRe: VMware separate hosts
ROger that andre. Thanks a lot. I can only update you in about 8 hours later! Really Hope you will still be around on the net. Ill try the bridged 1st thing in the morn. Hope it works. I assume I have...
View ArticleRe: VMware separate hosts
hi andre. the internet now works on the windows guest. i still cant get the linux to talk to the windows.i can ping the linux from windows and vice versa. but the windows cant access a webpage on the...
View ArticleRe: VMware separate hosts
by the way i did this in the linux: ifconfig eth0 192.168.2.4/24 to change the IP is this wrong?
View ArticleRe: VMware separate hosts
Since the network seems to work now, this sounds more like a web server configuration issue on the Linux VM than a networking issue!? André
View ArticleRe: VMware separate hosts
thanks Andre! I got it to work. You are right the web server config Needed some work. Thanks a lot andre appreciate ur help
View ArticleVMs lose path to mapped drive
We are having an issue with our virtual machines losing access to, or suffering severe lag to, a mapped drive. It seems very random and we have no lead as to whether this is software or hardware...
View ArticleRe: Meaning of BIOS beeps
I just had the same issue here. One long beep followed by two short beeps... Guest OS: Windows 8.1. How's this possible? All the hardware is virtualized... How can a virtual hardware have graphic card...
View ArticleLinux Guest does not start on Windows 8.1
Hi! I have a fresh Windows 8.1 installation (not Pro) as a host OS. When I start my Linux Guest (64 Bit Xubuntu), I just get a flat error message saying "internal error".Sometimes, and I haven't been...
View ArticleRe: Meaning of BIOS beeps
I got this problem on two VMs now, running on two different machines. What's causing this to happen? How can this be solved? This beeping is extraodrinarily annoying, particular as it seems impossible...
View ArticleRe: Meaning of BIOS beeps
What changed between it did not beep and the beep?Any errors in the logs?
View ArticleKrsytal_VMware_Player
Hi all, I have here a Krystalboard which was used in a PC running under XP pro for the soundediting tool MicroEditor from MTU.The board as a long PCI card.The card did run on an pc with xp pro. CD+G...
View ArticleRe: Krsytal_VMware_Player
Welcome to the Community - I am not sure what you want to do is possible - not all devices can be virtualized nor do I believe it is possible to do PCI pass through with VMware Player -
View ArticleRe: Meaning of BIOS beeps
There are a number of errors: 2014-01-08T20:29:18.807+01:00| vmx| I120: Log for VMware Workstation pid=3888 version=10.0.1 build=build-1379776 option=Release2014-01-08T20:29:18.807+01:00| vmx| I120:...
View ArticleRe: Meaning of BIOS beeps
Troubleshooting 101: What changed between it did not beep and the beep?
View Article